• YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

    PES Membrane Pleated filter cartridge

    PES Membrane Pleated filter cartridge

    Features & Benefits
    A. Unique hydrophilic polyethersulfone cartridges with absolutely rated
    B. Cartridges consist of a polyethersulfone membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.
    C. The compatibility with a broad range of chemicals and physiologicalinertness
    D. Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance
    E. Flushed with ultrapure water to remove any manufacturing debris
    F. No adhesive,thermal bonded manufacturing enable the smallest contaminant extraction and high durability.
    G. Increased surface area with excellent flow rates

    INTRODUCTION:

    Applications

    A. Final filtration for bacteria removal in RO system
    B. Sterilization of food and beverages
    C. Micro-filtration in ultrapure water system
    D. Beverage and wine filtration/clarification
    E. Photographic solutions
    F. Plating solutions
    G. Magnetic coatings

    Material Of Construction

    A. Media:Hydrophilic Polypropylene
    B. Support layer:Polypropylene
    C. Core/Cage/End adaptor:Polypropylene
    D. Sealing method:Thermal bonding

    Recommended Operating Conditions

    A. Max.Differential pressure:
    B. Forward-70psi (4.8bar) at 25℃
    C. Reverse-40psi (2.7bar) at 25℃
    D. Filters change recommended at 1.5bar
    E. Max.Operating temperature:80℃
    F. Sterilization:20times,30Minutes cycles at 121℃

    Cartridge Dimensions

    A. Filtration Area:0.55㎡ each 10″length
    B. Outer Diameter:69mm
    C. Nominal Length:5″,10″,20″,30″,40″etc
    D. Micron Rating:0.1,0.2,0.45µm

    Recommended Integrity Test

    Pore Size Minimum Water
    Bubble Point
    Diffusional Flow CC/Min @ Test Pressure 10" Length
    0.1μm -- ≤15 @ 48 Psig (3.3Bar)
    0.2μm ≥45 Psig (3.1Bar) ≤15 @ 35 Psig (2.4Bar)
    0.45μm ≥24 Psig (1.7Bar) ≤15 @ 20 Psig (1.4Bar)
     

    Odering Guide

    Model PES Micron Rating End Adaptor Seal Length

    PES - PES
    Pleated Type

    0.10:0.1μm

    0.20:0.2μm

    0.45:4.5μm

    CODE

    O - DOE Double Open End

    7 - 226/Fin

    8 - 222/Fin

    3 - 222/Flat Closed

    2 - 226/Flat Closed

    F - 215/Flat Closed

    S - O - Ring Insert/Flat Closed

    E - EPDM

    N - Buna

    S - Silicon

    V - Viton

    T - Telfon
    Encapsulated Viton

    5:5"

    10:10"

    20:20"

    30:30"

    40:40"

    久热这里只有精品视频6