• YOUR LOCATION : HOMEPAGE >> PRODUCTS >> MF FILTER CARTRIDGE

    Nominal Rated PP Melt Blown / Spun Cartridge Filters

    Nominal Rated PP Melt Blown / Spun Cartridge Filters

    Features & Benefits
    • Surface pore structure spreads water flow to reduce pressure drop
    • Continuously gradient pore structure increases the capacity of dust holding, longer service life and high efficiency
    • High strength and pressure resistance
    • Micro-denier melt blown filtration fiber, high removal ratings
    • 100% PP for compatibility with a wide range of process fluids
    • Formed by thermal bond without use of any binders and adhesives

    INTRODUCTION:

    High performance pure polypropylene depth dual-gradient density filter media is under highly controlled manufacturing process which guarantees consistently reproducible filter performance. PM-series filters are comprised of an inner compact rated section for exceptional dirt-holding capability and the outstanding performance which meets the highest quality requirements are selected for critical filtration application.
    PM-Series cartridge is able to retain contaminants throughout the entire cross section of the filter. The density increases progressively from the exterior surface to the interior and "graded density" allows larger particles to be trapped near the surface while smaller particles penetrate the larger open areas to be trapped nearer the center of the filter in the smaller openings.

    Applications

    • Drinking water treatment
    • Pre-filtration for RO+DI
    • Food and beverage
    • Plating, Chemicals and Solvents

     

    Specifications

    • Material : 100% PP microfiber
    • Micron rating: 1, 3, 5, 10, ... 100um
    • OD. 62-65mm/110-115mm; ID. 28mm
    • Length: 5", 10", 20", 30", 40", 50", 60"

    Operating Conditions

    • Maximum differential pressure: 4.1bar at 20℃; 2.1bar at 60℃; 1.1bar at 80℃
    • Recommended change out: 2.0bar
    • Maximum temperature: 80℃

    Dual-Gradient Density Media Rating (um)

    Nominal Micron Rating (um) 1 3 5 10 25 50
    Outer Pre-Filter Media (um) 25 25 50 50 75 100
    Inner Compact Media (um) 1 3 5 10 25 50

    Dirt Holding Capacity

    Micron Rating(μm) 1 3 5 10 25 50
    Dirt Holding Capacity(Gram/10"L) >15 >20 >30 >60 >120 >150
     

    Ordering Guide

    Model PM Media Type Support Core Dimension Micron Rating End Adaptor Seal Length Inch

    PM-1
    Standard

    PM-2
    Thin Groove

    PM-3
    Broad Groove

    PM-4
    Cavity Surface

    P-High
    Performance

    A-Absolute
    Rate

    P-pp

    N-none

    S-ID28mm
    OD62-65mm

    B-ID28mm
    OD110-115mm

    L-ID96/114mm
    OD150mm

    01:1μm

    03:3μm

    05:5μm

    10:10μm

    ......

    ......

    Code 0-DOE w/o adaptor

    Code 7 - 226/Fin

    Code 8 - 222/Fin

    Code 3 - 222/Flat closed

    Code S - Spring Cap

    E-EPDM

    N-Buna

    S-Silicone

    V-Viton

    5:5"

    10:10"

    20:20"

    30:30"

    40:40"

    50:50"

    60:60"

     

    久热这里只有精品视频6